AR68.30-D-7607-01TS | Perform additional operations when replacing front roof lining | ||
Warning | Risk of injury caused by slipping when clamping blade in the multicutter and by splinters when cutting out bonded windows | Wear protective gloves and safety glasses. | |
Topical note | Notes on carrying out repair work in the vehicle interior |
Shown on front roof lining (1) with code FF5 (Stowage box/tray above windshield) and with code FF8 (1-DIN slot at front below headliner) |
1 | Front headliner |
2 | Cutouts (for stowage box/tray above windshield) |
3 | Cutouts (for sun visor or stowage box/tray above windshield) |
4 | Cutouts (for stowage box/tray above windshield) |
5 | Cutouts (for sun visor or stowage box/tray above windshield) |
6 | Cutout (for front device installation frame below roof lining) |
D68.30-2530-76
1 | Shim front roof lining (1) in area to be processed with suitable spacers (e.g. foam or Styrofoam blocks). |
Do not use hard or sharp-edged objects as spacers. |
2 | Make required cutouts (2, 3, 4, 5, 6) according to prepunched curring lines using suitable tool (e.g. a commercially available oscillating cutting tool). |
Depending on vehicle equipment. |
Adopt required cutouts (2, 3, 4, 5, 6) from old part for new part. |
Powiązane dokumenty
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- as6500z000301a Niebezpieczeństwo obrażeń wskutek ześlizgnięcia się noża podczas mocowania w wielofunkcyjnym przyrządzie do cięcia i przez odpryski szkła podczas wycinania przyklejonych elementów