ar6830d1307tsr

Remove/install entrance trim in rear passenger compartment

Typ ar · temat 68.30 · wersja 0100 · 2019-02-27

Dotyczy: Model 907.2

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 68 Wyposażenie wewnętrzne › 68.30 Wykładziny, rama ozdobna — Seria 907 (modele 2**)

EinPAS 37 Wyposażenie wnętrza › 37.45 Okładzina › 37.45.37 Okładzina we wnęce na nogi — Seria 907 (modele 2**)

AR68.30-D-1307TSR

Remove/install entrance trim in rear passenger compartment

12.02.2019

Model

907.2

Remove/install entrance trim in rear passenger compartment

D68.30-A007-79

Shown on model 907.2 on the left side of the vehicle for removed B-pillar trim

1

Entrance paneling

4

Cap

2

Cover

5

Screw

3

Screw

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove rear bench seat.

Model 907.2
except code S92 (Deletion seats passenger comp. if double cab)

AR91.12-D-4025TS

2

Remove covers (2) with a suitable tool.

3

Remove screw/bolts (3).

4

Remove covers (4) with a suitable tool.

Installation: Replace damaged covers (4).

5

Remove bolts (5).

6

Lift entrance trim (1) in the rear area, pull out under the B-pillar trim, and remove.

Installation: Ensure that the entrance trim (1) is seated correctly under the B-pillar trim.

WIS Service Media
wsm://04_ 201900_32

7

Install in the reverse order

Powiązane dokumenty