Remove/install rear roof paneling

AR68.30-A-7608TSL

Remove/install rear roof paneling

13.06.2019

Model

907.8

1

Retaining clips

4

Rear headliner

2

Expansion rivet

5

Rear center headliner

3

Expansion rivet

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove corresponding dome lamps in the passenger compartment.

AR82.20-D-0117TSR

2

Remove rear section of the air duct of the roof-mounted air conditioning system.

Model 907.8
with code HH9 (Air conditioner, automatic heater control)
Model 907.8
with code HK4 (Rear air conditioning, reinforced)

AR83.50-D-7980-02TSR

3

Remove D-pillar trims.

AR68.30-D-4497TSR

4

Unclip retaining clips (1) of the rear center roof lining section (5) and check for damage.

 Clip remover

*452589016300

If retaining clips (1) are damaged



Replace retaining clip (1).

5

Remove expansion rivet (3) of the rear roof lining (4) and check for damage.

 Clip remover

*452589016300

If the expansion rivet (3) is damaged,



replace expansion rivet (3).

6

Remove expansion rivets (2) of the rear roof lining (4) and check for damage.

 Clip remover

*452589016300

If the expansion rivets (2) are damaged,



Replace expansion rivet (2).

7

Guide electrical wiring harness out of the rear roof lining (4).

8

Carefully lower rear roof lining (4) and take out of the vehicle.

 Helper required.

9

Install in the reverse order



Check

10

Perform function test of the dome lamps.