S67.30-0005-06
Side window between B-pillar and C-pillar
1 Suction lifting device
2 Side window
3 Spacer
A-A Cutting area with cutting wire
B-B Cutting area with cutting wire
A-B Cutting area with cutting blade (can be cut from inside with end stop)
Dimensions:
X 100 mm
S67.30-0004-06
Side window between C-pillar and D-pillar
1 Cup suction tool
2 Side window
3 Spacer
A-A Cutting area with cutting wire
B-B Cutting area with cutting wire
A-B Cutting area with cutting blade (can be cut from inside with end stop)
Dimensions:
X 100 mm
S67.30-0006-06
Side window in sliding door
1 Cup suction tool
2 Side window
3 Spacer
A-A Cutting area with cutting wire
Dimensions:
X 100 mm
Modification notes
| Removing | ||
1 | Preheat adhesive cartridge | Remove adhesive cartridge from repair kit, insert unopened into cartridge preheater and switch on cartridge preheater The preheating time is at least 20 minutes. | |
Cartridge preheater (not adjustable) gotis://K_67.0_02.0 | |||
Repair kit | |||
2 | Remove edge guard on inside of side window (2) | The edge guard is glued on. | |
3 | Install suction cup (1) on side window (2) | Suction lifting device gotis://K_67.0_03.0 | |
Danger! | Risk of injury due to tear or warming up of cutting wire and through glass splinters when cutting out glued windows | Wear protective gloves and safety glasses. | |
4 | Cut out side window (2) in cutting area using cutting wire (A-A and B-B) | Secure side window (2) against falling down. Aid of helper required. | |
The complete side window (2) can also be cut out using the cutting wire. | |||
"Veritrac" window removal tool gotis://K_67.0_01.0 | |||
Danger! | Risk of injury caused by slipping when inserting blade in the multicutter and by glass splinters when cutting out bonded windows | Always interrupt air supply or power supply before inserting or removing blade. Wear protective gloves and safety glasses. | |
5 | Cut out side window (2) in cutting area using cutting blade (A-B) or in remaining area using cutting blade | Secure side window (2) against falling down. Aid of helper required. | |
The side window (2) in the sliding door can have all its straight areas cut out using the cutting blade. | |||
Cutting blade | |||
Window devitrification tool, "FSC 1.6" gotis://K_67.0_01.0 | |||
6 | Remove side window (2) | Suction lifting device gotis://K_67.0_03.0 | |
7 | Prepare body flange for installation of window | Cut any residual adhesive material back to approx.1 mm (remove any loose residual adhesive material).touch up any paint damage on the body flange, that is not covered up by adhesive material. | |
| General notes about painting the body flange in the glazing area | Pay attention to notes concerning the preparation of new parts such as the A-pillar, the roof or the side walls. | |
Cutting blade | |||
Window devitrification tool, "FSC 1.6" gotis://K_67.0_01.0 | |||
| Install | ||
8 | Prepare and attach spacer (3) | ||
| |||
9 | Install side window (2) | ||
Cartridge gun gotis://K_67.0_02.0 | |||
Cartridge preheater (not adjustable) gotis://K_67.0_02.0 | |||
Suction lifting device gotis://K_67.0_03.0 | |||
Repair kit | |||
10 | Remove spacer (3) after the curing time | ||
11 | Install edge guard on inside of side window (2) |
124 589 21 63 00
Cutting blade
Repair materials
Number | Designation | Order number |
BR00.45-Z-1015-02A | Repair kit, glazing, installing window, 2-component adhesive | A 220 670 00 93 |
Powiązane dokumenty
- ah9800p940806a Ogólne wskazówki dotyczące lakierowania kołnierza nadwozia w obszarze szyb
- ar6730s230503a
- as6700z000101a Niebezpieczeństwo obrażeń wskutek ześlizgnięcia się noża podczas mocowania w wielofunkcyjnym przyrządzie do cięcia i przez odpryski szkła podczas wycinania wklejanych szyb.
- as6700z000401a Niebezpieczeństwo zranienia w wyniku pęknięcia lub rozgrzania się drutu tnącego oraz skaleczenia odłamkami szkła przy wycinaniu wklejanych szyb.
- wf5850n672001a