Remove/install detachable parts when replacing rear window

AR67.20-P-2101MFA

Remove/install detachable parts when replacing rear window

12.09.2019

Model

118.6, 177.0, 247

Shown on model 177.0

1

Electrical connector

4

Electrical connector

2

Electrical connector

W13/1

Ground point (left rear window heater)

3

Electrical line

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Remove rear spoiler.

Model 118.6, 247.6

AR72.20-P-4000MFD

Model 177.0, 247.0/7

AR72.20-P-4000MFA

2

Remove liftgate wiper motor (M6/4).

Model 118.6

AR82.30-P-6550MFD

Model 177.0, 247

AR82.30-P-6550MFA

3

Release and disconnect electrical connectors  (1).

4

Release electrical connector (2) of the rear window heater, disconnect, and unclip from the liftgate.

5

Remove nut from the left rear window heater ground point (W13/1) and remove from the stud bolt with the electric line (3).

Topical note

Notes on the use of paint scraping nuts on ground connections

AH00.19-P-1000-20A

 Ground point (left rear window heater)

*BA00.19-P-1037-02E

6

Release and disconnect electrical connector (4).

Model 118.6, 177.0, 247
with code 882 (Interior motion sensor)

7

Install in the reverse order.

 Ground points

Number

Designation

Model 118

Model 177

BA00.19-P-1037-02E

Ground point (left rear window heater)

W13/1

Nm

10

10

 Ground points

Number

Designation

Model 247

BA00.19-P-1037-02E

Ground point (left rear window heater)

W13/1

Nm

10