ar8230p6550mfa

Remove/install the liftgate wiper motor

Typ ar · temat 82.30 · wersja 0200 · 2019-09-19

Dotyczy: Model 177.0, 247

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.30 Wycieraczki — Seria 177 (modele 0**) · Seria 247

EinPAS 36 Widoczność › 36.30 Wycieraczki/ spryskiwacze › 36.30.50 Mechanizm wycieraczek — Seria 177 (modele 0**) · Seria 247

AR82.30-P-6550MFA

Remove/install the liftgate wiper motor

16.09.2019

Model

177.0, 247

Modification notes

05.09.2019

Check grommet (3) for damage.

Operation step 6.

Remove/install the liftgate wiper motor

P82.30-3509-08

Shown on model 177.0

1

Electrical connector

3

Grommet

2

Bolts

M6/4

Tailgate wiper motor

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove liftgate wiper arm.

AR82.30-P-6910MFA

2

Remove center liftgate trim.

AR72.20-P-6618MFA

3

Release electrical connector(1) and disconnect.

4

Remove screw/bolts (2) .

5

Remove liftgate wiper motor (M6/4).

6

Check grommet (3) for damage.

If damage is present,

Replace grommet (3).

7

Install in the reverse order.

Powiązane dokumenty