Install side roof paneling and weld in · ar6510p102003mfb · Mercedes-Benz WIS

AR65.10-P-1020-03MFB

Install side roof paneling and weld in

Model

247.0/6/7

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1009-01MA	Front door to rear door	Dimension "I"	mm	4 (0,5)	4 (0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1009-01MA	Front door to rear door	Dimension "I"	mm	4 (0,5)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1010-01MA	Front door cover to rear door cover (B-pillar)	Dimension "J"	mm	4 (1)	4 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1010-01MA	Front door cover to rear door cover (B-pillar)	Dimension "J"	mm	4 (1)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1013-01MA	Roof spoiler to side wall	Dimension "M"	mm	4,5 (1)	4,5(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1013-01MA	Roof spoiler to side wall	Dimension "M"	mm	4,5 (1)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1014-01MA	Roof spoiler to roof	Dimension "N"	mm	5,5 (1,5)	5,0(1,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1014-01MA	Roof spoiler to roof	Dimension "N"	mm	5(+1/-1,5)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1015-01MA	Liftgate/trunk lid to side wall	Dimension "O"	mm	4,5 (1)	5(-1/+0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1015-01MA	Liftgate/trunk lid to side wall	Dimension "O"	mm	5(1,5)
		For picture, see		AR60.00-P-0700-01MFA

129 589 03 21 00

Feeler gauge

216 589 02 23 00

Set of spacer blocks

Repair materials

Number	Designation	Order number
BR00.45-Z-1003-01A	White sealing compound, 310 ml, DBL 6069.20	A 001 989 63 20
BR00.45-Z-1057-07A	Basic body filler	A 012 989 29 71

 The following operation steps are shown on the left side of the vehicle. In case of damage on the right side of the vehicle, these steps must be performed analogously.
Refer to the superordinate service document for further information.
The safety information in the superordinate service document must be observed.

P65.10-A045-09

1.1	Model 247.0/6/7 except code 413 (Automatic panoramic sliding sunroof) Install side roof paneling (1) and center roof paneling and fit with  spacer blocks and  feeler gauge.

1.2	Model 247.0/6/7 with code 413 (Automatic panoramic sliding sunroof) Install side roof paneling (1) and rear roof paneling and fit with  spacer blocks and  feeler gauge.

2.1	Model 247.0/6/7 except code 413 (Automatic panoramic sliding sunroof) Remove side roof paneling (1) and center roof paneling.

2.2	Model 247.0/6/7 with code 413 (Automatic panoramic sliding sunroof) Remove side roof paneling (1) and rear roof paneling.

P65.10-A046-08

3	Sealant shall be applied to foam part (arrow).

4	Install side roof paneling (1) and fix in place.

5	 Remove spacer blocks.

P65.10-A047-09

6	Side roof paneling (1)   (areas G1, G3, G4, and G5).

7	Side roof paneling (1)   (area G2).

P65.10-A048-09

8	Side roof paneling (1)   (areas H1, H2, H3, and H4).

9	Surface grind inert gas welds on side roof paneling (1) (areas H1, H2, H3, and H4).

10	Grind inert gas plug welds down flat on side roof paneling (1) (area G2).

11	Clean weld joints on side roof paneling (1).

12	Tin surfaces on rear side roof paneling (1) with body solder or use basic body filler to spackle them and grind them off (areas H1, H2 H3 and H4).

13	Remove solder residues or grinding dust.