ar6000p070001mfa

Gap dimensions on hoods, doors and lids

Typ ar · temat 60.00 · wersja 0200 · 2019-08-27

Dotyczy: Model 177 Model 247

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 60 Nadwozie kompletne › 60.00 Informacje ogólne — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.20 Kabina kierowcy/ karoseria › 35.20.30 Kabina kierowcy — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.40 Drzwi przednie — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.41 Drzwi środkowe — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.43 Drzwi tylne — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.44 Drzwi przesuwne — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.45 Drzwi kierowcy — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.46 Drzwi tylne — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.47 Drzwi awaryjne — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.48 Drzwi podnoszone — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.35 Drzwi › 35.35.49 Drzwi bagażnika — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.30 Pokrywa komory silnika — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.31 Klapa w części przedniej — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.33 Klapa tylna/ klapa bagażnika — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.34 Pokrywa wlewu paliwa/gniazda — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.60 Klapa obsługowa/ klapa serwisowa — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.36 Pokrywa/ klapa › 35.36.61 Klapa w przestrzeni bagażowej — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.51 Drzwi pasażerskie 1 › 35.51.32 Skrzydło drzwi/rama drzwi — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.52 Drzwi pasażerskie 2 › 35.52.32 Skrzydło drzwi/rama drzwi — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.53 Drzwi pasażerskie 3 › 35.53.32 Skrzydło drzwi/rama drzwi — Seria 177 · Seria 247

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.54 Drzwi pasażerskie 4 › 35.54.32 Skrzydło drzwi/rama drzwi — Seria 177 · Seria 247

AR60.00-P-0700-01MFA

Gap dimensions on hoods, doors and lids

Model	177
Model	247

Modification notes

25.06.2019

Rear door to side wall

Model 247.0

BE60.00-P-1011-01MA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1001-01JA	Engine hood to bumper	Dimension "A"	mm	3 (1)	3 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1001-01MA	Engine hood to bumper	Dimension "A"	mm	3 (1)	3(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1001-01MA	Engine hood to bumper	Dimension "A"	mm	3(1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1002-01JA	Engine hood to fender	Dimension "B"	mm	3 (0,5)	3 (0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1002-01MA	Engine hood to fender	Dimension "B"	mm	3 (0,5)	3(0,5)
		Dimension "B1"	mm	-	-
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1002-01MA	Engine hood to fender	Dimension "B"	mm	3 (0,5)
		Dimension "B1"	mm	5(+1/-1,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1003-01JA	Headlamp front to bumper	Dimension "C"	mm	2 (1,5)	2 (1,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1003-01MA	Headlamp front to bumper	Dimension "C"	mm	2 (1,5)	2(1,5)
		Dimension "C1"	mm	-	-
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1003-01MA	Headlamp front to bumper	Dimension "C"	mm	2 (1,5)
		Dimension "C1"	mm	2(1,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1004-01JA	Headlamp bottom to bumper	Dimension "D"	mm	2 (1)	2 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1004-01MA	Headlamp bottom to bumper	Dimension "D"	mm	2 (1)	2(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1004-01MA	Headlamp bottom to bumper	Dimension "D"	mm	2 (1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1005-01JA	Headlamp to fender	Dimension "E"	mm	2 (1)	2 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1005-01MA	Headlamp to fender	Dimension "E"	mm	2 (1)	2 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1005-01MA	Headlamp to fender	Dimension "E"	mm	2 (1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1006-01JA	Fender to bumper at front	Dimension "F"	mm	0 (+0,5)	0 (+0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1006-01MA	Fender to bumper at front	Dimension "F"	mm	0 (+0,5)	0 (+0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1006-01MA	Fender to bumper at front	Dimension "F"	mm	0 (+0,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1007-01JA	Fender to side wall (A-pillar)	Dimension "G"	mm	2 (+1/-0,5)	2 (+1/-0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1007-01MA	Fender to side wall (A-pillar)	Dimension "G"	mm	2 (+1/-0,5)	2 (+1/-0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1007-01MA	Fender to side wall (A-pillar)	Dimension "G"	mm	2 (+1/-0,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1008-01JA	Front door to fender	Dimension "H"	mm	4 (0,5)	4 (0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1008-01MA	Front door to fender	Dimension "H"	mm	4 (0,5)	4 (0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1008-01MA	Front door to fender	Dimension "H"	mm	4(+0,5/-1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1009-01JA	Front door to rear door	Dimension "I"	mm	4 (0,5)	4 (0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1009-01MA	Front door to rear door	Dimension "I"	mm	4 (0,5)	4 (0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1009-01MA	Front door to rear door	Dimension "I"	mm	4 (0,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1010-01JA	Front door cover to rear door cover (B-pillar)	Dimension "J"	mm	4 (1)	4 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1010-01MA	Front door cover to rear door cover (B-pillar)	Dimension "J"	mm	4 (1)	4 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1010-01MA	Front door cover to rear door cover (B-pillar)	Dimension "J"	mm	4 (1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1011-01JA	Rear door to side wall	Dimension "K"	mm	3 (+0,5)	3 (+0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1011-01MA	Rear door to side wall	Dimension "K"	mm	3,5 (+0,5)	3,5 (+0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1011-01MA	Rear door to side wall	Dimension "K"	mm	3 (+0,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1012-01JA	Fuel filler flap/fuel filler flap hybrid to side wall (circumferential)	Dimension "L"	mm	2 (0,5)	2 (0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1012-01MA	Fuel filler flap/fuel filler flap hybrid to side wall (circumferential)	Dimension "L"	mm	2 (+1/-0,5)	2,5(0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1012-01MA	Fuel filler flap/fuel filler flap hybrid to side wall (circumferential)	Dimension "L"	mm	2 (+1/-0,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0
BE60.00-P-1013-01JA	Roof spoiler to side wall	Dimension "M"	mm	4,5 (1)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1013-01MA	Roof spoiler to side wall	Dimension "M"	mm	4,5 (1)	4,5(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1013-01MA	Roof spoiler to side wall	Dimension "M"	mm	4,5 (1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0
BE60.00-P-1014-01JA	Roof spoiler to roof	Dimension "N"	mm	5,5 (1,5)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1014-01MA	Roof spoiler to roof	Dimension "N"	mm	5,5 (1,5)	5,0(1,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1014-01MA	Roof spoiler to roof	Dimension "N"	mm	5(+1/-1,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1015-01JA	Liftgate/trunk lid to side wall	Dimension "O"	mm	4,5 (1)	3 (+1/-0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1015-01MA	Liftgate/trunk lid to side wall	Dimension "O"	mm	4,5 (1)	5(-1/+0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1015-01MA	Liftgate/trunk lid to side wall	Dimension "O"	mm	5(1,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1016-01JA	Liftgate/trunk lid to bumper at rear	Dimension "P"	mm	5,5 (1,5)	5,5 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1016-01MA	Liftgate/trunk lid to bumper at rear	Dimension "P"	mm	6 (2)	6(2)
		Dimension "P1"	mm	-	5(-1/+2)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1016-01MA	Liftgate/trunk lid to bumper at rear	Dimension "P"	mm	6 (2)
		Dimension "P1"	mm	4,5(1,0)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1017-01JA	Outer tail lamp to side wall	Dimension "Q"	mm	1 (+1/-0,5)	1 (+1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1017-01MA	Outer tail lamp to side wall	Dimension "Q"	mm	1,5 (0,5)	1,5(0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1017-01MA	Outer tail lamp to side wall	Dimension "Q"	mm	1,5(0,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1018-01JA	Outer tail lamp to bumper at rear	Dimension "R"	mm	2 (1)	1,5 (+1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1018-01MA	Outer tail lamp to bumper at rear	Dimension "R"	mm	2 (1)	2(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1018-01MA	Outer tail lamp to bumper at rear	Dimension "R"	mm	2 (1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0
BE60.00-P-1019-01JA	Outer tail lamp to liftgate	Dimension "S"	mm	3,5 (+1/-0,5)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1019-01MA	Outer tail lamp to liftgate	Dimension "S"	mm	3,5 (+1/-0,5)	4(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1019-01MA	Outer tail lamp to liftgate	Dimension "S"	mm	4(1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1020-01JA	Outside of taillamp to inside of taillamp	Dimension "T"	mm	3,5 (+1/-0,5)	3,5 (+1/-0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1020-01MA	Outside of taillamp to inside of taillamp	Dimension "T"	mm	3,5 (+1/-0,5)	4(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1020-01MA	Outside of taillamp to inside of taillamp	Dimension "T"	mm	4(1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1021-01JA	Liftgate/trunk lid to inner tail lamp (top)	Dimension "U"	mm	1 (0,5)	1 (0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1021-01MA	Liftgate/trunk lid to inner tail lamp (top)	Dimension "U"	mm	1 (0,5)	1(0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1021-01MA	Liftgate/trunk lid to inner tail lamp (top)	Dimension "U"	mm	1 (0,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1022-01JA	Liftgate/trunk lid to inner tail lamp (bottom)	Dimension "V"	mm	2,5 (1)	1,5 (+1/-0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1022-01MA	Liftgate/trunk lid to inner tail lamp (bottom)	Dimension "V"	mm	2,5 (1)	1,5(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1022-01MA	Liftgate/trunk lid to inner tail lamp (bottom)	Dimension "V"	mm	1,5(1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1023-01JA	Bumper at rear to side wall	Dimension "W"	mm	0 (+0,5)	0 (+0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0	Model 247.6
BE60.00-P-1023-01MA	Bumper at rear to side wall	Dimension "W"	mm	0 (+0,5)	0,5(-0,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.7
BE60.00-P-1023-01MA	Bumper at rear to side wall	Dimension "W"	mm	0 (+0,5)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.1/9
BE60.00-P-1024-01JA	Trunk lid to rear window	Dimension "X"	mm	8,5 (2)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0
BE60.00-P-1024-01MA	Longitudinal member panel to fender	Dimension "X"	mm	4,5 (1)
		For picture, see		AR60.00-P-0700-01MFA

Test and adjustment values for gap dimensions

Number	Designation			Model 177.0	Model 177.1/9
BE60.00-P-1025-01JA	Longitudinal member panel to fender/front door/rear door	Dimension "Y"	mm	5 (1)	5 (1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.0
BE60.00-P-1025-01MA	Longitudinal member panel to front door/rear door	Dimension "Y"	mm	5,0 (1)
		For picture, see		AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.6	Model 247.7
BE60.00-P-1026-01MA	Headlamp top to bumper	Dimension "Z"	mm	3,5(1)	3,5(1)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.6	Model 247.7
BE60.00-P-1027-01MA	Rear window to side spoiler	Dimension "AA"	mm	3(1,5)	3(1,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions

Number	Designation			Model 247.6	Model 247.7
BE60.00-P-1028-01MA	Rear window (bottom) to liftgate/trunk	Dimension "AB"	mm	3(-1,5/+1)	3(+1/-1,5)
		For picture, see		AR60.00-P-0700-01MFA	AR60.00-P-0700-01MFA

Gap dimensions on hoods, doors and lids

129 589 03 21 00

Feeler gauge

Gap dimensions on hoods, doors and lids

P60.00-3207-09

Front and side gap dimensions, model 177.0

Gap dimensions on hoods, doors and lids

P60.00-3208-09

Rear gap dimensions, model 177.0

Gap dimensions on hoods, doors and lids

P60.00-A007-09

Front and side gap dimensions, model 177.1

Gap dimensions on hoods, doors and lids

P60.00-A008-09

Rear gap dimensions, model 177.1

Gap dimensions on hoods, doors and lids

P60.00-A009-09

Front and side gap dimensions, model 247.0

Gap dimensions on hoods, doors and lids

P60.00-A010-09

Rear gap dimensions, model 247.0

Gap dimensions on hoods, doors and lids

P60.00-A019-09

Front and side gap dimensions, model 247.6/7

Gap dimensions on hoods, doors and lids

P60.00-A020-09

Rear gap dimensions, model 247.6/7

1	Check gap dimensions with  feeler gauge as per sketches.

 Gap dimensions must be adjusted as per the drawings. The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap should be max. 1 mm over the entire length. If the inside clearance is too large or too small, the movable body parts must be centered accordingly. The reference measurements apply only for repair work on vehicles damaged in accidents.