ar6420d100203ts

Install crashbox and weld in

Typ ar · temat 64.20 · wersja 0100 · 2018-02-20

Dotyczy: Model 907.6/7 with code Z1M (M1 registration)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 64 Ściana tylna i tył pojazdu › 64.20 Tył pojazdu — Seria 907 (modele 6**, 7**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.31 Ściana tylna/ tył pojazdu › 35.31.30 Ściana tylna/ tył pojazdu — Seria 907 (modele 6**, 7**)

AR64.20-D-1002-03TS

Install crashbox and weld in

Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

000 588 02 84 00 Welder

WS60.00-P-0022K

Model

907.6/7

with code Z1M (M1 registration)

The next steps are shown on the left side of the vehicle for model 907.733 and must be similarly performed on the right side of the vehicle in the event of damage.

Install crashbox and weld in

1

Install crash box (1), fit, and fix in place.


Observe dimensions (A, B).



2

Crash box (1) (areas A and B).



3

Clean weld joints.


a

Dimension (40 mm)

b

Dimension (40 mm)

D64.20-0094-06

Powiązane dokumenty