129 589 09 23 00
129 589 00 98 00
129 589 03 21 00
170 589 01 23 00
Portal angle set
Set of welding gauges for rear fender
Feeler gauge
Protective sleeve
129 589 01 98 00
Welding bead trap
Commercially available tools
Number | Designation | |
WH58.30-Z-1003-01A | Electrode miller | |
WH58.30-Z-1003-02A | Clamping pliers | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
P63.50-0342-06
1 Install rear fender using welding gauges. Adjust gaps between the rear fender and trunk lid or rear fender and front door. Then secure the rear fender with clamping pliers.
P63.50-0348-09
2 Realize on rear fender.
When spot welding also protect the roof which has been put down and covered by means of a welding bead trap.
P63.50-0353-06
P63.50-0357-06
3 Realize on rear fender in the areas A or in area B.
P63.50-0359-01
P63.50-0358-01
4 Reposition spot flange in left wheelhouse using a beading tool (similar to right side of vehicle).
5 Clean all welded joints with a wire brush.