P63.30-2649-09
Position resistance spot welds at precise position of resistance spot welds made at factory to ensure minimum required strength for weld joints.
(areas C, E and G).
1 Fit front section of side longitudinal member reinforcement (1.1) or rear section of side longitudinal member reinforcement (1.2) and fasten with vise grip pliers.
2.1 Front section on side longitudinal member reinforcement (1.1) (areas C, D, E and F).
If front area is damaged.
2.2 Rear section on side longitudinal member reinforcement (1.2) (areas E, F, G and H).
If rear area is damaged.
3.1 Front section on side longitudinal member reinforcement (1.1) (area B).
If front area is damaged.
3.2 Rear section on side longitudinal member reinforcement (1.2) (area A).
If rear area is damaged.
4 Rear section on side longitudinal member reinforcement (1.2) (area J).
If rear area is damaged.
5 Grind all welds down flat, if required.
6 Clean all other welds with wire brush.