ar6330d000201fa

Separating door frame paneling bottom section

Typ ar · temat 63.30 · wersja 0100 · 2013-11-20

Dotyczy: MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.30 Podłużnica na zewnątrz — Seria 909

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.20 Kabina kierowcy/ karoseria › 35.20.50 Wejście — Seria 909

AR63.30-D-0002-01FA

Separating door frame paneling bottom section

MODEL

909

Separating door frame paneling bottom section

1

Expose spot welds on door frame paneling bottom section (1) and cut out (arrows).


2

Mark separation lines (4) on door frame paneling bottom section (1) .


Dimensions:
a = approx. 55 mm
b = approx. 25 mm


3

Separate door frame paneling bottom section (1) along marked separation lines (4).


Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.


4

Cut door frame paneling bottom section (1) along side wall paneling (3) up to bead at height of separation line (4) (broken line (5)).

D63.30-0010-06

Separating door frame paneling bottom section

5

Expose spot welds at front on wheel arch on door frame paneling bottom section (1) and cut out (arrows).

D63.30-0011-12

Separating door frame paneling bottom section

6

Expose spot welds at bottom on door frame paneling bottom section (1) and cut out (arrows).


7

Remove door frame paneling bottom section (1).

D63.30-0012-04