ar6330d000201fa

Separating door frame paneling bottom section

Type ar · topic 63.30 · version 0100 · 2013-11-20

Applies to: MODEL 909

Where it sits

Function group 3 Body › 63 Side wall › 63.30 Outer longitudinal members — Series 909

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.50 Entrance — Series 909

AR63.30-D-0002-01FA

Separating door frame paneling bottom section

MODEL

909

Separating door frame paneling bottom section

1

Expose spot welds on door frame paneling bottom section (1) and cut out (arrows).


2

Mark separation lines (4) on door frame paneling bottom section (1) .


Dimensions:
a = approx. 55 mm
b = approx. 25 mm


3

Separate door frame paneling bottom section (1) along marked separation lines (4).


Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.


4

Cut door frame paneling bottom section (1) along side wall paneling (3) up to bead at height of separation line (4) (broken line (5)).

D63.30-0010-06

Separating door frame paneling bottom section

5

Expose spot welds at front on wheel arch on door frame paneling bottom section (1) and cut out (arrows).

D63.30-0011-12

Separating door frame paneling bottom section

6

Expose spot welds at bottom on door frame paneling bottom section (1) and cut out (arrows).


7

Remove door frame paneling bottom section (1).

D63.30-0012-04