ar6320s110901e

Partially cut off inner A-pillar reinforcement

Typ ar · temat 63.20 · wersja 0101 · 2016-06-03

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 447 · Seria 448

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 447 · Seria 448

AR63.20-S-1109-01E

Partially cut off inner A-pillar reinforcement

Model

447, 448

Partially cut off inner A-pillar reinforcement

S63.20-4733-09

a

Dimension approx. 110 mm

b

Dimension approx. 40 mm

c

Dimension approx.60 mm

1

Scribe separating points and cut (areas A and B).

Do not make the cuts too deep.
Otherwise the components below can be damaged and weakened.

Partially cut off inner A-pillar reinforcement

S63.20-4734-09

2

Expose spot welds on inner A-pillar reinforcement (2) and cut out (areas C to G).

Cut out spot welds on both sides (area G).

3

Bend open sheet metal lug (area G).

4

Remove damaged inner A-pillar reinforcement (2).

Partially cut off inner A-pillar reinforcement

5

Sand down mating surfaces to bare metal in crosshatched areas .


Sand down spot weld flanges to bare metal on both sides.



6

Remove shavings and drill chips.



7

Coat insides of spot weld flanges with zinc dust paint.


S63.20-4735-06