ar6320d000201fa

Separating right B-pillar paneling bottom section

Typ ar · temat 63.20 · wersja 0100 · 2013-11-22

Dotyczy: MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.20 Słupki — Seria 909

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.45 Słupek — Seria 909

AR63.20-D-0002-01FA

Separating right B-pillar paneling bottom section

MODEL

909

Separating right B-pillar paneling bottom section

1

Mark separation lines (3) on right B-pillar paneling (2).


Dimensions:
a = approx. 25 mm
b = approx. 260 mm

D63.20-0054-06

Separating right B-pillar paneling bottom section

2

Expose spot welds on right B-pillar paneling (2) up to marked separation lines (3) and cut out (area A, B and C).


3

Separate right B-pillar paneling (2) at marked separation lines (3).


4

Remove right B-pillar paneling (2) bottom section.

D63.20-0055-06

Separating right B-pillar paneling bottom section

5

Grind mating surfaces down to bare metal (area A1 and A2).


6

Grind spot weld flange down to bare metal on both sides and coat inside with zinc dust paint (areas B1, B2 and B3).

D63.20-1461-06