ar6310s012001ea

Cut away left side wall paneling with window cutout

Typ ar · temat 63.10 · wersja 0101 · 2016-03-02

Dotyczy: Model 447.601 with code W16 (Window front left, fixed, in sidewall/sliding door) with code W29 (Window fixed behind) except code T19 (Sliding door left) Model 447.701 with code W16 (Window front left, fixed, in sidewall/sliding door) with code W29 (Window fixed behind) except code T19 (Sliding door left) Model 447.701 with code W16 (Window front left, fixed, in sidewall/sliding door) with code W32 (Ausstellfenster Fahrgastraum hinten elektrisch) except code T19 (Sliding door left) Model 447.701 with code

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 447 (modele 601, 701, 811)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 447 (modele 601, 701, 811)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 447 (modele 601, 701, 811)

AR63.10-S-0120-01EA

Cut away left side wall paneling with window cutout

Model

447.601

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W29 (Window fixed behind)

except code T19 (Sliding door left)

Model

447.701

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W29 (Window fixed behind)

except code T19 (Sliding door left)

Model

447.701

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W32 (Ausstellfenster Fahrgastraum hinten elektrisch)

except code T19 (Sliding door left)

Model

447.701

with code W18 (Sliding window front left in sidew./sliding door)

with code W29 (Window fixed behind)

except code T19 (Sliding door left)

Model

447.701

with code W18 (Sliding window front left in sidew./sliding door)

with code W32 (Ausstellfenster Fahrgastraum hinten elektrisch)

except code T19 (Sliding door left)

Model

447.811

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W29 (Window fixed behind)

except code T19 (Sliding door left)

Model

447.811

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W32 (Ausstellfenster Fahrgastraum hinten elektrisch)

except code T19 (Sliding door left)

Cut away left side wall paneling with window cutout

S63.10-5817-09

x

Dimension approx. 15 mm

1

Mark separating point on side wall paneling (1) and cut (area A).

Do not cut too deeply.
Otherwise the components below can be damaged and weakened.

Cut away left side wall paneling with window cutout

S63.10-5818-09

2

Expose spot welds on side wall paneling (1) and cut out (areas B to D).

3

Expose spot weld and drill through (area E).

Cut away left side wall paneling with window cutout

S63.10-5819-09

4

Expose spot welds on side wall paneling (1) and cut out (areas F and G).

Cut out spot welds (arrows) through two panel thicknesses.

5

Expose laser weld seams on side wall paneling (1) and cut (areas H and I).

Cut away left side wall paneling with window cutout

S63.10-5820-09

6

Expose spot welds on rear side wall paneling bottom section (2) and cut out (areas J to M).

7

Expose MAG spot welds on rear side wall paneling bottom section (2) and cut out (area N).

8

Separate inert gas weld on rear side wall paneling bottom section (2) (area O).

Cut away left side wall paneling with window cutout

9

Heat sidewall paneling (1) in crosshatched areas.


Cross-hatched areas are bonded.



10

Remove damaged side wall paneling (1).


S63.10-5821-06

Cut away left side wall paneling with window cutout

11

Grind mating surfaces down to bare metal in the cross-hatched inner C-pillar sidewall .


Sand down spot weld flanges to bare metal on both sides.



12

Remove shavings and drill chips.



13

Coat insides of spot weld flanges with zinc dust paint.


S63.10-5822-06

Cut away left side wall paneling with window cutout

14

Grind mating surfaces down to bare metal in crosshatched areas and around hole (area P).


Sand down spot weld flanges to bare metal on both sides.



15

Remove shavings and drill chips.



16

Coat insides of spot weld flanges with zinc dust paint.


S63.10-5823-06