P63.50-2836-06
The following operation steps are shown on model 171.
1 Install outer rear wheel well with rear fender, trunk lid, taillamps, rubber seal and lock striker and fit.
2 Check and adjust gap dimensions.
3 Fix outer rear wheel well in place.
4 Remove rear fender, trunk lid, taillamps, rubber seal and lock striker.
P63.50-2890-06
5 Outer rear wheelhouse (1) (areas A, B and C ).
6 Clean spot weld flanges.
7 Remove shavings.
8 Apply zinc dust paint from inside to spot weld flange, which is no longer accessible after repair (areas A, B and C ).