ar6310d565402ts

Prepare center bottom sidewall paneling

Typ ar · temat 63.10 · wersja 0100 · 2017-12-14

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.39 Poszycie z prawej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR63.10-D-5654-02TS

Prepare center bottom sidewall paneling

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Model

907.6/7, 910.6

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

The following operation steps are shown on model 907.633 on the left component part and must be performed analogously on the right side of vehicle in the event of damage.

Prepare center bottom sidewall paneling

D63.10-1941-07

1

Grind mating surfaces down to bare metal on lower center side wall paneling (1) in cross-hatched areas.

Sand down spot weld flanges to bare metal on both sides.

2

Zinc dust paint to insides of spot weld flanges.

Powiązane dokumenty