ar6310d565402ts

Prepare center bottom sidewall paneling

Type ar · topic 63.10 · version 0100 · 2017-12-14

Applies to: Model 907.6/7, 910.6

Where it sits

Function group 3 Body › 63 Side wall › 63.10 Side wall — Series 907 (models 6**, 7**) · Series 910 (models 6**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.35 Fender/sidewall — Series 907 (models 6**, 7**) · Series 910 (models 6**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.38 Left panel — Series 907 (models 6**, 7**) · Series 910 (models 6**)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.39 Right panel — Series 907 (models 6**, 7**) · Series 910 (models 6**)

AR63.10-D-5654-02TS

Prepare center bottom sidewall paneling

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Model

907.6/7, 910.6

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

The following operation steps are shown on model 907.633 on the left component part and must be performed analogously on the right side of vehicle in the event of damage.

Prepare center bottom sidewall paneling

D63.10-1941-07

1

Grind mating surfaces down to bare metal on lower center side wall paneling (1) in cross-hatched areas.

Sand down spot weld flanges to bare metal on both sides.

2

Zinc dust paint to insides of spot weld flanges.

Referenced documents