Model | 470 |
with code Y1P (Hard cover) | |
except code Y1Q (Polished roll bar (styling bar)) | |
except code Y1R (Black roll bar (styling bar)) | |
Model | 470 |
with code Y1P (Hard cover) | |
with code Y1Q (Polished roll bar (styling bar)) | |
Model | 470 |
with code Y1P (Hard cover) | |
with code Y1R (Black roll bar (styling bar)) |
S60.30-A011-09
1 | Cover | 4 | Lock | |
2 | Expansion rivet | 5 | Retaining ring | |
3 | Linkage rod |
S60.30-A012-09
6 | Locking mechanism | 9 | Handle | |
7 | Nut | 10 | Seal | |
8 | Platform cover lock cylinder | 11 | Platform cover |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Open platform cover. | ||
2 | Remove cover (1) in direction of arrow (A). | To do so, remove the expansion rivets (2). | |
Installation: Replace expansion rivet (2). | |||
3 | Remove linkage (3) in direction of arrow (B). | For this purpose, release locks (4) in direction of arrow (C). | |
4 | Remove retaining ring (5) using suitable tool. | ||
5 | Remove locking mechanism (6) as shown (arrows D, E, F). | ||
6 | Unscrew nut (7). | ||
7 | Remove platform cover lock cylinder (8) with handle (9) in direction of arrow (G) from platform cover (11). | Installation: Ensure seal (10) is correctly seated. | |
8 | Install in the reverse order. | ||
| Check | ||
9 | Check function of platform cover lock cylinder (8). |
Powiązane dokumenty
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.