Set up Celette straightening bench

AR60.10-S-1060E

Set up Celette straightening bench

04.03.2020

Model

447, 448

Modification notes

27.02.2020

Method modified.

Operation steps 1.1, 1.2

1

Straightening bench

 Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Typ 447 mit Motor 780

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on battery

Model 447 with engine 780

AH54.10-P-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

Typ 447 mit Motor 780

AH00.00-Z-0300-01A

Position vehicle on straightening bench (1), remove from straightening bench (1)

1.1

Remove HV battery module.

Model 447 with engine 780.701
* Applies to Europe only

AR47.70-S-0001F

1.2

Remove high-voltage battery

Model 447 with engine 780.702
* Applies to Europe only

AR47.70-S-0002G

2

Remove wheels.

AR40.10-S-1100E

3

Remove plugs at vehicle floor.

 Remove only the plugs on which the mounts of the straightening system of the straightening bench (1) are to be attached to the mounting holes.

4

Set up straightening bench (1).



000 588 01 23 00 Body straightening system

WS60.00-P-0023K

 Observe set-up plans provided.

5

Position vehicle on straightening bench (1).

6

Secure vehicle on straightening bench (1).

7

Remove vehicle from straightening bench (1) in reverse order.