Gap dimensions |
Number | Designation | Model 470, 471 | |||
BE60.00-N-1005-01P | Gap dimensions | Front door to longitudinal member | Dimension "H" | mm | 6 (1,5) |
Front door to rear door | Dimension "I" | mm | 4,4 (1) | ||
Front door to A-pillar | Dimension "J" | mm | 5,5 (1) | ||
Fuel filler flap, all round | Dimension "K" | mm | 3,5 (1) | ||
NOx reducing agent tank filler flap, all round | Dimension "L" | mm | 3,5 (1) | ||
For picture, see | |||||
Gap dimensions |
Number | Designation | Model 470, 471 | |||
BE60.00-N-1007-01P | Gap dimensions | Rear window, all round | Dimension "P" | mm | 3,7 (2) |
Third brake light, all round | Dimension "Q" | mm | 1,5 (1) | ||
Platform side wall to dropside | Dimension "R" | mm | 5,8 (1,5) | ||
Rear lamp to platform side wall | Dimension "S" | mm | 1,5 (1,3) | ||
Rear lamp to dropside | Dimension "T" | mm | 5,4 (1,7) | ||
Handle in dropside, all round | Dimension "U" | mm | 1 (0,1) | ||
For picture, see | |||||
129 589 03 21 00
Feeler gauge
Adjust the hoods, doors and covers as per the drawings. The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap may be max. 0.5 mm over the entire length.
If the inside clearance of the gap is too large or too small, the movable body parts must be centered accordingly.
The reference measurements apply only for repair work on bodies damaged in accidents.
1 | Check gap dimensions. |
Use feeler gauge. |
If necessary |
|
Adjust gap dimensions. |
S60.00-4882-09
S60.00-4883-09