Remove/install detachable parts on left entrance for replacing longitudinal member

AR60.00-S-0027E

Remove/install detachable parts on left entrance for replacing longitudinal member

04.03.2020

Model

447, 448

except code T19 (Sliding door left)

Modification notes

27.02.2020

Method extended

Step 4

1

Cable tie

2

Subharness

3

Floor covering

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Typ 447 mit Motor 780

AS00.00-Z-0035-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

Typ 447 mit Motor 780

AH00.00-Z-0300-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1.1

Remove outer detachable parts and inner trims to replace the side wall up to the window cutout.

With corresponding damage profile.

AR60.00-S-0021EA

1.2

Remove outer detachable parts and inner trims to replace the complete side wall.

With corresponding damage profile.

AR60.00-S-0020EA

2

Remove fender liner in the front fender.

AR88.10-S-1300E

3

Remove front bumper.

AR88.20-S-2000E

4

Remove mounting rail of the longitudinal member panel in the repair area.

Model 447.8, 448.8

AR88.80-S-6005CH

5

Remove front fender.

AR88.10-S-1000E

6

Remove door sill.

AR68.30-S-4100E

7

Remove cable ties (1).

 Installation: Replace cable ties (1).

8

Place subharness (2) to one side.

9

Place floor covering (3) in the repair area to one side.

10

Remove fuel tank.

Model 447 with engine 274 except code ZL3 (National version for Latin America), model 448 with ENGINE 274

AR47.10-S-4100EG

Model 447 with engine 274 with code ZL3 (National version for Latin America), model 447 with engine 622, 651

AR47.10-S-4100E

11

Remove filler neck of fuel tank.

Model 447 with engine 274 except code ZL3 (National version for Latin America), model 448 with engine 274

AR47.10-S-7541EG

12

Remove AdBlue®tank.

Model 447 with engine 622, Model 447 with engine 651 except code MF4 (emissions class Euro 4 standard N1 GR.III/N2)

AR14.40-S-2014E

Model 447 with engine 654.9

AR49.20-S-2014EA

13

Install in the reverse order.