S60.00-4851-06
S60.00-4847-09
1 | Coolant pipe | 4 | Bracket | 7 | Screw | ||
2 | Coolant hose | 5 | Guide housing | 8 | Insulation | ||
3 | Screw | 6 | Screw |
9 | Bracket |
10 | Ground cable |
11 | Nut |
12 | Plug |
S60.00-4850-06
| Remove/install | ||
1 | Remove expansion reservoir | ||
2 | Remove front end | ||
3 | Remove engine air intake duct downstream of air filter | ||
4 | Remove front crashbox | ||
5 | Remove condenser |
| |
6 | Remove radiator | ||
7 | Position oil cooler outside of working area | Model 447 with engine 651 with transmission 722.9 | |
Do not disconnect oil lines from oil cooler. | |||
8 | Remove fender liner in fender | ||
9 | Remove air intake pipe | ||
10 | Remove coolant pipe (1) with coolant hose (2) connected | ||
11 | Remove bracket (4) | To do this, remove screws/bolts (3). | |
M6 | |||
12 | Remove guide housing (5) | For this purpose, remove bolts (6, 7). | |
Installation: Check seal, replace if required. | |||
M6 | |||
13 | Remove insulation (8) | ||
14 | Remove bracket (9) | ||
15 | Remove ground lines (10) | To do so, unscrew nut (11). | |
M8 | |||
16 | Remove plugs (12) | ||
17 | Install in the reverse order |