AR54.65-S-0002A | Removing and installing Parktronic System (PTS) sensors in rear bumper | 23.9.98 |
MODEL 638.0 /1 /2 with CODE (J44) ultrasonic backup assist
S54.65-2515-06
1 Bumper
2 Electric cable
3 Clamp ring
4 Woodruff key
5 Sensor
6 Edge of sensor
| Removing, installing | ||
1 | Remove bumper (1) and disconnect connectors | When removing the bumper ensure that the electric cable (2) of the sensors is not damaged. | |
2 | Turn clamping ring (3) through 90° and pull off | Installation: Push clamping ring onto sensor (5) in the as installed position and engage against the spring force with slight pressure | |
3 | Remove woodruff key (4) | Installation: Pay attention to correct installed position of woodruff key! | |
4 | Remove sensor (5) | Installation: The edge of the sensor (6) must have its widest point downwards. The connection for the connector must point to the right on the inside of the bumper. | |
5 | Install in reverse order |