Remove/install parameterizable special module (PSM)

AR54.21-D-2476TS

Remove/install parameterizable special module (PSM)

27.04.2018

Model

907, 910

Shown on model 910

1

Parameterizable special module control unit

3

Electrical connectors

2

Relay holder

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Perform commissioning of parameterizable special module control unit (1) with vehicle diagnosis system.

When replacing parameterizable special module control unit (1).



AD00.00-D-2000-06TS

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3.1

Remove driver seat.

Model 907, 910
with code SB3 (Suspension seat, comfort version, driver's seat)

AR91.10-D-1000TS

3.2

Remove turn plate with mounted driver's seat.

Model 907, 910
with code SR8 (Swivel base for driver' seat)

AR91.10-D-1456TS

 Do not disconnect driver's seat from turn plate.

3.3

Set driver's seat to the foremost and uppermost position.

Model 907, 910
except code SB3 (Suspension seat, comfort version, driver's seat)
except code SR8 (Swivel base for driver' seat)

4

Release upper seat base cover and remove from working area.

5

Remove parking system control unit and bring out of working area with connected electric lines.

Model 907, 910
with code JB6 (Parking package with 360-degree camera)
Model 907, 910
with code JB7 (Parking Package with reversing camera)

AR54.65-D-0018TS

6

Remove relay holder (2) from seat base and bring out of working area with connected electric lines.

If required.

7

Disconnect electrical connection (3).

8

Unclip parameterizable special module control unit (1) at catch hooks (arrows A) and remove upwards.

9

Install in the reverse order.