Remove/install parking system control unit

AR54.65-D-0018TS

Remove/install parking system control unit

02.05.2018

Model

907, 910

Shown on model 907.7 and removed driver's seat

1

Parking system control unit

3

Relay holder

2

Seat base cover

4

Electrical connectors

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Perform commissioning of parking system control unit (1) with vehicle diagnosis system.

When replacing the parking system control unit (1).



AD00.00-D-2000-06TS

2

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

3.1

Remove driver seat.

Model 907, 910
with code SB3 (Suspension seat, comfort version, driver's seat)

3.2

Remove turn plate with mounted driver's seat.

Model 907, 910
with code SR8 (Swivel base for driver' seat)

AR91.10-D-1456TS

 Do not disconnect driver's seat from turn plate.

3.3

Set driver's seat to the foremost and uppermost position.

Model 907, 910
except code SB3 (Suspension seat, comfort version, driver's seat)
except code SR8 (Swivel base for driver' seat)

4

Release seat base cover (2) and remove from working area.

5

Remove relay holder (3) from seat base and bring out of working area with connected electric lines.

6

Disconnect electrical connections (4).

 The number of electrical connections (4) may vary depending on the vehicle equipment involved.

7

Unclip parking system control unit (1) at catch hooks (arrows A) and remove upwards.

8

Install in the reverse order.



Check

9

Perform function test of parking system.