Remove/install 12 V socket

AR54.10-D-1009TS

Remove/install 12 V socket

27.04.2018

Model

907, 910

1

12V socket

C

Installation location of seat base on the driver's side

A

Installation location on the instrument panel

D

Installation location of right or left D-pillar trim

B

Installation location of center trim on instrument panel

Shown on left D-pillar

1

12V socket

3

Cover

1

12V socket

2

Pliers

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

2.1

Remove driver seat.

Model 907, 910
with code SB3 (Suspension seat, comfort version, driver's seat)
Model 907, 910
with code SR8 (Swivel base for driver' seat)
For the removal of the 12 V socket (1) in the seat base on the driver's side.

AR91.10-D-1000TS

2.2

Set driver's seat in the rearmost and topmost position.

Model 907, 910
except code SB3 (Suspension seat, comfort version, driver's seat)
except code SR8 (Swivel base for driver' seat)
For the removal of the 12 V socket (1) in the seat base on the driver's side.

2.3

Release stowage tray on the instrument panel and remove until the electrical connector of the 12 V socket (1) is accessible.

Model 907, 910
with code ES5 (Charging package, dashboard)
except code FJ1 (Hinged lid for stowage compartment)
For the removal of the 12 V socket (1) in the stowage tray on the instrument panel.

AR68.10-D-0003TS

2.4

Release lockable center stowage compartment on the instrument panel and remove until the electrical connector of the 12 V socket (1) is accessible.

Model 907, 910
with code ES5 (Charging package, dashboard)
with code FJ1 (Hinged lid for stowage compartment)
For the removal of the 12 V socket (1) in the lockable center stowage compartment on the instrument panel.

AR68.10-D-1518TS

2.5

Loosen left or right D-pillar trim and remove until the electrical connector of the 12 V socket (1) is accessible.

Model 907.6/7
with code V36 (Panelling under roof)
For the removal of the 12 V socket (1) in the left or right D-pillar trim.

AR68.30-D-4497TSR

2.6

Remove cover (3).

For the removal of the 12 V socket (1) in the D-pillar.

 Clip remover

*452589016300

2.7

Remove lower center stowage compartment from instrument panel.

For the removal of the 12 V socket (1) in the center trim at the instrument panel.

AR68.10-D-1513TS

3

Loosen seat base cover and remove from working area.

For the removal of the 12 V socket (1) in the seat base on the driver's side.

4

Disconnect electrical connector of the 12 V socket (1).

5

Open flap of 12 V socket (1).

6

Release 12 V socket (1) using pliers (2) and pull out from the respective installation location.

 The studs of the  pliers (2) must engage into the cutouts on the 12 V socket (1) housing (arrow D).

 Pliers

*169589003700

7

Install in the reverse order.



Check

8

Perform function test of corresponding 12 V socket (1).