1 | Exhaust tailpipe |
2 | Clip |
3 | Decoupling element |
D49.10-1178-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Remove underbody paneling. | If installed. | |
Installation: Install underfloor paneling only after the leak test. | |||
3 | Loosen clamp (2). | Installation: Check clamp (2) for damage and wear. | |
Clamp, exhaust pipe to SCR catalytic converter | |||
If clamp (2) is damaged or worn, | |||
| |||
Replace clamp (2). | |||
4 | Unhook decoupling element (3) from tailpipe (1). | Installation: Check decoupling element (3) for damage and wear. | |
If the decoupling element (3) is damaged or worn, | |||
| |||
replace decoupling element (3). | |||
5 | Remove tailpipe (1). | Have second person help. | |
Installation: Remove combustion and corrosion residues from separating points with rotary wire brush. Remove combustion and corrosion residues from separating point on tailpipe (1) only when reusing the tailpipe (1). | |||
Installation: Coat contact surface of the tailpipe (1) to the SCR catalytic converter with heat-resistant lubricating paste. Ensure unstressed and correct installation position or unobstructed movement of the tailpipe (1). | |||
Commercially available devices/tools | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
6 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Perform engine test run and check exhaust system in the area of the clamp (2) for leak tightness. |
Powiązane dokumenty
- ah0000p500001a Wskazówki dotyczące zapobiegania uszkodzeniom na skutek zabrudzeń i ciał obcych
- ah0060n010001ts Wskazówki dotyczące podnoszenia pojazdu, ustawiania na podporach
- ar0060d100004ts
- ar6130d1001ts
- as0000z000201a Niebezpieczeństwo zranienia skóry i oczy na skutek kontaktu z gorącymi lub żarzącymi się przedmiotami
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.
- as4900z000101a Niebezpieczeństwo poparzenia, uduszenia i zatrucia podczas prac przy układzie wydechowym i połączonych z nim elementach. Niebezpieczeństwo uduszenia i zatrucia przez wdychanie gazowych i stałych składników spalin. Niebezpieczeństw