1 | Battery management system control unit |
2 | Seat base cover |
3 | Mounting clip |
4 | Electrical connector |
D47.70-A001-76
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2.1 | Remove driver seat. | Model 910 except code SR8 (Driver's seat bogie) | |
2.2 | Remove turn plate with installed driver's seat. | Model 910 with code SR8 (Driver's seat bogie) | |
Do not separate driver's seat from turn plate. | |||
3 | Remove seat base cover (2). | ||
4 | Remove nuts of retaining clips (3). | The retaining clips (3) are destroyed in this process. | |
Installation: Attach new retaining clips (3) to battery management system control unit (1) and press battery management system control unit (1) onto threaded pins. The retaining clips (3) latch into place while doing so. | |||
5 | Remove battery management system control unit (1). | For this purpose, disconnect electrical connector (4). | |
6 | Install in the reverse order. | ||
7 | Carry out commissioning of battery management system control unit (1) using diagnostic system. | When replacing battery management system control unit (1). | |
| Connect/disconnect diagnostic unit |
Powiązane dokumenty
- ad0000d200006ts
- ah0000z030001a Ogólne wskazówki dotyczące pojazdów z instalacją wysokiego napięcia i/lub akumulatorem litowo-jonowym i/lub gazowym systemem napędu oraz osobistego wyposażenia ochronnego
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar9110d1000ts
- ar9110d1456ts
- as0000z003501a Zagrożenie życia podczas prac przy elementach i systemach U >=30 V napięcie zmienne (AC) bądź U >=60 V napięcie zmienne