ar4710s7000a

Removing and installing fuel level sensor

Typ ar · temat 47.10 · wersja 0101 · 2010-01-19

Dotyczy: MODEL 638 with ENGINE 601, 611.980

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 47 Układ paliwowy, zasilanie energią zespołu napędowego › 47.10 Zbiornik paliwa — Seria 601 · Seria 611 (modele 980) · Seria 638

EinPAS 16 Zasilanie paliwem/ energią silnika › 16.10 Zasilanie paliwem › 16.10.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 601 · Seria 611 (modele 980) · Seria 638

AR47.10-S-7000A

Removing and installing fuel level sensor

18.1.10

MODEL 638 with ENGINE 601, 611.980

Removing and installing fuel level sensor

S47.20-1001-06

1 Union nut

2 Gasket

A37 Fuel level sensor

Remove/install

Danger!

Risk of explosion if ignition takes place, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel.

No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove fuel tank

AR47.10-S-4100A

2

Separate collar clamp at feed line, return flow line and detach

Replace collar clamps. Collect fuel which flows out.

3

Unscrew union nut (1)

*BA47.10-N-1002-01A

4

Remove fuel tank sensor (A37)

Do not bend float linkage of fuel sensor otherwise the level of fuel in the tank will not be correctly indicated.

Pay attention to installation position of fuel tank sensor (A37). Replace gasket (2).

5

Install in the reverse order

Inspecting

6

Inspect fuel system in area of fuel tank sensor (A37) for leaks

Fuel tank

Number

Designation

Model 638

BA47.10-N-1002-01A

Union nut of fuel tank sensor module

Nm

35

Powiązane dokumenty