ar4245d0820f

Remove/install Electronic Stability Program (ESP(R)) control unit

Typ ar · temat 42.45 · wersja 0101 · 2018-07-10

Dotyczy: Model 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 42 Układ hydrauliczny i mechanizm hamulców › 42.45 Elektroniczny program stabilizacji jazdy (ESP), system stabilizujący (SR) — Seria 909

EinPAS 26 Aktywne systemy bezpieczeństwa › 26.20 System kontroli trakcji/ hamowania › 26.20.11 Moduł sterujący/ przekaźnik — Seria 909

AR42.45-D-0820F

Remove/install Electronic Stability Program (ESP(R)) control unit

10.07.2018

Model

909

Remove/install Electronic Stability Program (ESP(R)) control unit

D42.45-0037-08

1

ESP control unit

2

Electrical connector

3

Bolts

Topical note

Information on replacing ABS/ESP(R) control unit

AH42.45-N-0820-01A

Remove/install

Danger

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Remove transmitter key from ignition lock and disconnect ground line from battery

Topical note

Notes on battery

AH54.10-P-0001-01A

Danger

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground cable from additional battery

Model 909.6
with code E36 (Disconnecting relais if auxiliary battery)

Topical note

Notes on battery

AH54.10-P-0001-01A

3

Disconnect electrical connector (2)

4

Remove screws/bolts (3)

Installation: Replace bolts (3).
Screw in the bolts (3) in a crosswise sequence and tighten in stages.

Bolt, ESP control unit to hydraulic assembly

*BA42.45-N-1002-01A

5

Remove ESP control unit (1)


Pull the ESP control unit (1) off the hydraulic unit carefully, straight and without tilting or tipping.
The valves and ESP control unit (1) can otherwise be damaged.

6

Install in the reverse order

7

Connect diagnostic system and read out fault memory

AD00.00-D-2000-04F

Delete the fault memory if necessary.

8

In diagnostic system, make settings under menu item "Control unit adaptations".

When replacing ESP control unit (1).

9

Disconnect diagnostic system

AD00.00-D-2000-04F

Electronic Stability Program (ESP)

Number

Designation

Model 909

BA42.45-N-1002-01A

Bolt, ESP control unit to hydraulic assembly

Stage 1

Nm

2

Stage 2

Nm

3

Powiązane dokumenty