AR40.30-D-0402NB | Carry out distance and comparison measurements on front and rear axles | 9.12.09 |
MODEL YD4, YD5
MODEL 904.66 with CODE (ZU7) National version for Canada
MODEL 904.66 with CODE (ZU8) National version for USA
MODEL 904.66 with CODE (ZU9) National version for Mexico
D40.30-0004-05
Frame measurement data
V1 Distance (diagonal) from check bore "k1" in frame side member to check bore "k2" in opposite frame side member.
V2 Distance (diagonal) from check bore "K" in measuring bridge to check bore "k1" in frame side member.
V3 Distance from check bore "k1" in frame longitudinal member to check bore "k2" in the same frame longitudinal member.
H1 Distance (diagonal) from check bore "K" in measuring bridge to check bore "k3" in side rail.
H2 Distance (diagonal) from check bore "k3" in side rail to check bore "k4" in side rail.
H3 Distance from check bore "k3" in frame longitudinal member to check bore "k4" in the same frame longitudinal member.
BR1 Distance of check bores "k1" from left to right longitudinal frame member.
BR2 Distance between check bores "k2" and "k4" from left to right longitudinal frame members.
BR3 Distance of check bore "k4" from left to right side rail.
Figure item, etc. | Work instructions | ||
| Frame measurement data for accident measurement | Test values for distance and comparison measurements on rear axle | |
Test values for distance and comparison measurement on front axle | |||
Frame test values | |||
Frame height offset test values Frame height offset measured diagonally across frame using e.g. spirit level (length approx. 1 m). Requirement: Vehicle is level! | |||
| Beam trammel | Beam trammel | |
| Measuring tips | Measuring tip with scale | |
| Measuring cone | Measuring cone Firma Nestle & Fischer Vermessungsgeräte GmbH, D-72280 Dornstetten | |
| Contact arm | Contact arm with scale Firma Nestle & Fischer Vermessungsgeräte GmbH, D-72280 Dornstetten |
Test values for distance and comparison measurements on rear axle
Number | Designation | Model | Model | |||
BE40.30-N-1001-05B | Test value | H1 | Effective dimension | mm | - | - |
max. difference | mm | 4 | 4 | |||
H2 | Effective dimension | mm | - | - | ||
max. difference | mm | 4 | 4 | |||
H3 | Effective dimension | mm | 1880 (2) | 2830 (2) | ||
max. difference | mm | 3 | 3 | |||
See picture | ||||||
Test values for distance and comparison measurement on front axle
Number | Designation | Models | |||
BE40.30-N-1001-06B | Test value | V1 | Effective dimension | mm | - |
max. difference | mm | 4 | |||
V2 | Effective dimension | mm | - | ||
max. difference | mm | 4 | |||
V3 | Effective dimension | mm | 1461 (2) | ||
max. difference | mm | 3 | |||
See picture | |||||
Frame test values
Number | Designation | Models | |||
BE40.30-N-1001-09B | Frame width test value | BR1 | Effective dimension | mm | 860 (2) |
Distance of inner side of side rails from one another | 800 (3) | ||||
BR2 | Effective dimension | mm | 980 (3) | ||
Distance of inner side of side rails from one another | 920 (3) | ||||
BR3 | Effective dimension | mm | 768 (3) | ||
Distance of inner side of side rails from one another | 708 (3) | ||||
See picture | |||||
BE40.30-N-1002-09B | Permitted deviation of vertical parallelism on left and right in relation to side rail | Frame width | mm | 768 | |
Deviation | ° | 0° 22' | |||
Height difference, approx. | mm | 5 | |||
Frame width | mm | 860 | |||
Deviation | ° | 0° 20' | |||
Height difference, approx. | mm | 5 | |||
Frame width | mm | 980 | |||
Deviation | ° | 0° 18' | |||
Height difference, approx. | mm | 5 | |||