ar4020s0201a

Generalities for chassis alignment

Typ ar · temat 40.20 · wersja 0101 · 1999-05-26

Dotyczy: MODEL 638

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 40 Koła, pomiary podwozia › 40.20 Pomiary podwozia — Seria 638

EinPAS 20 Zawieszenie › 20.10 Pomiar podwozia › 20.10.20 Diagnostyka/kontrola/pomiary/ustawianie — Seria 638

AR40.20-S-0201A

Generalities for chassis alignment

4.7.95

MODEL 638

Generalities for chassis alignment

S40.20-0503-06

Checking

State of vehicle

The vehicle must be measured and adjusted in the state in which is it normally used.

The chassis alignment will be carried out with reference to the vehicle level

Use measurements sheets for chassis alignment

Block of sheets

Order no. B20.800.98.230.00.B-00/0291

Continuous paper

Order no. B20.800.98.230.10-B-00/0491

1

State of the tyres

Visual control of wear, depth of tread, damage

2

State of the rims

Visual control of damage

3

Tyre pressure

See tyre pressure values on the utilisation manual or on the characteristics plate placed on the tank lid, correcting them if required

4

Vehicle interior

Visual control of damage, corrosion of chassis components and body carrier parts, leaks in sets and lines

5

Play of wheel bearings

Check without comparing clock

6

Visual control of steering mechanics

Visual control

AP46.00-D-4650A

7

Bellows in steering linkage

Visual control

AR46.40-S-7200A

Powiązane dokumenty