AR40.15-P-0100R | Remove, install tire pressure monitoring system control unit | 7.5.02 |
MODELS 230
with CODE (475) Tire pressure monitor (Beru)
with CODE (475) Tire pressure monitor (Siemens)
P40.15-2074-06
1 Left paneling
2 Electrical connector
3 Electrical connector
4 Control unit carrier
4a Nut
4b Nut
5 Electrical connector
N69/5 Keyless Go control unit
N88 TPM [RDK] control unit
Modification notes
5.11.02 | Read out variant coding and transfer to a new TPM [RDK] control unit, added | Stage 2 | |
5.11.02 | Activate tire pressure monitor, added | Step 11 |
| Remove/install | ||
1.1 | Close vario roof | ||
2 | Read in variant coding of the TPM [RDK] control unit (N88) in STAR DIAGNOSIS | When replacing the ME-SFI [ME] control unit (N88) | |
Installation: Transfer stored data into the new TPM [RDK] control unit (N88). | |||
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system | |||
3 | Remove left paneling (1) in luggage compartment | ||
4 | Disconnect electrical connector (2) and electrical connector (3) of the left and right Keyless Go antenna in the luggage compartment from the Keyless Go control unit (N69/5) | ||
5 | Unscrew nut (4a), loosen nuts (4b) | ||
6 | Remove control unit carrier (4) from the installation position and put down in luggage compartment | ||
7 | Detach TPM [RDK] control unit (N88) from control unit carrier (4) | ||
8 | Release and disconnect electrical connector (5) | ||
9 | Install in the reverse order | ||
10 | Read out fault memory and erase if required | ||
11 | Activate tire pressure monitor |
Commercially available tools
Powiązane dokumenty
- ad0000p200004a Podłączanie STAR DIAGNOSIS, odczytywanie pamięci usterek
- ad0000p200004a
- ar5430p100002rar
- ar6830p4800r