Remove/install spring control arm

AR35.20-P-0119MFA

Remove/install spring control arm

26.02.2019

Model

118, 177, 247

with code U55 (Multi-link axle)

1

Spring control arm

5

Screw

 Warning

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on repair work on suspension components

AH00.00-P-0100-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove left or right rear axle spring.

Model 118, 177, 247
with code U55 (Multi-link axle)
except code U54 (Compound-link axle)

AR32.20-P-0232MFB

2

Unscrew nut of screw (5), remove screw (5) and remove spring link (1).

 Self-locking nut, spring control arm to rear axle carrier

*BA35.20-P-1001-01D

3

Install in the reverse order.

 Spring control arm

Number

Designation

Model 118, 177, 247

BA35.20-P-1001-01D

Self-locking nut, spring control arm to rear axle carrier

Stage 1

Nm

50

Stage 2

°

90