P35.20-2423-09
1 | Tie rod | 3 | Screw | |
2 | Trim Panels | 4 | Screw |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Topical note | Notes on self-locking nuts and bolts | ||
Notes on safety-relevant components | |||
Notes on repair work on suspension components | |||
| Remove/install | ||
1 | Lift vehicle with lifting platform. | ||
2 | Unclip left or right trim (2) from tie rod (1) and remove. | ||
3 | Mark installation position of eccentric disk relative to screw (3). | The eccentric disk (3) on the screw is used for toe adjustment. | |
4 | Unscrew nut of screw (3). | Installation: | |
Installation: Always replace screws and nuts of the suspension components. | |||
Nut, tie rod to rear axle carrier | |||
5 | Unscrew nut from screw (4). | Installation: | |
Installation: Always replace screws and nuts of the suspension components. | |||
Nut, tie rod to wheel carrier | |||
6 | Remove screws (3, 4) and remove tie rod (1). | ||
7 | Install in the reverse order. | ||
| Measure | ||
8 | Perform chassis alignment. |
Powiązane dokumenty
- ah0000n000101a Wskazówki dotyczące samozabezpieczających śrub i nakrętek
- ah0000p002001a Wskazówki dotyczące połączeń śrubowych tworzonych według kąta dokręcenia
- ah0000p010001a Wskazówki dotyczące napraw komponentów zawieszenia
- ah0000z001901a Wskazówki dotyczące elementów wpływających na bezpieczeństwo
- ar0060p1006a Podnoszenie, opuszczenie pojazdu na podnośniku
- ar4020p0200mfa
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.