Remove/install left radial shaft sealing ring on front axle transmission

AR33.30-P-7134EQ

Remove/install left radial shaft sealing ring on front axle transmission

16.12.2019

Model

293

1

Radial shaft sealing ring

3

Drift

2

Front axle transmission

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A



Remove

1

Remove left intermediate shaft.

AR33.30-P-0625EQ

2

Pull radial shaft sealing ring (1) out of front axle differential (2) using internal extractor, pull-off device and impact extractor.

 Connect  internal extractor and  slide hammer puller to threaded rod of  extraction tool.

 Internal extractor

*203589033300

 Impact extractor

*602589003300

 Extraction tool

*221589043300



Install

3

Moisten sealing lip of new radial shaft sealing ring (1) with transmission oil.



Transmission oils (specification 236.24)

BB00.40-P-0236-24A

4

Install new radial shaft sealing ring (1) using drift (3).

 The end stop and the extension of the scope of supply  drift are not required.

 Installation: The drift (3) must make contact with the front axle transmission (2) up to the end stop (arrow).

 Drift

*253589001500

5

Install left intermediate shaft.

AR33.30-P-0625EQ