ar3330p0540msa

Install new radial sealing ring on outside right of front axle gear

Typ ar · temat 33.30 · wersja 0102 · 2020-02-21

Dotyczy: Model 257 with engine 256 with transmission 725.0 with code M005 (Vehicles with 4MATIC/all-wheel drive)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 33 Oś przednia › 33.30 Napęd, mechanizm różnicowy, wał napędowy — Seria 257

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.50 Oś przednia › 17.50.51 Półoś/ wałek napędowy — Seria 257

Dotyczy też silników/skrzyń biegów: 256 ***, 725 0**

AR33.30-P-0540MSA

Install new radial sealing ring on outside right of front axle gear

18.02.2020

Model

257 with engine 256 with transmission 725.0

with code M005 (Vehicles with 4MATIC/all-wheel drive)

Install new radial sealing ring on outside right of front axle gear

1

Front axle transmission

2

Radial shaft sealing ring

P33.30-2173-11

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove

1

Remove center and rear lower engine compartment lining.

AR61.20-P-1105FR

2

Unscrew drain screw from front axle differential (1) and drain hypoid gear oil.

Model 257 with engine 256 with transmission 725.0
with code M005 (Vehicles with 4MATIC/all-wheel drive)

Model 257 with engine 256 with transmission 725.0
with code M005 (Vehicles with 4MATIC/all-wheel drive)With VAG 160

AR33.25-P-0300-01LWX

3

Remove right front axle shaft.

AR33.30-P-0620MSA

4

Pull radial shaft sealing ring (2) out of front axle differential (1) using internal extractor, pull-off device and impact extractor.

Connect the internal extractor and impact extractor to the threaded rod of the  extraction tool.

Internal extractor

*203589033300

Extraction tool

*221589043300

Impact extractor

*602589003300

Check

5

Check seat of radial shaft sealing ring (2) for damage.

If damage is found,

replace front axle differential (1).


AR33.30-P-0525MSA

Install

6

Install radial shaft sealing ring (2) using drift.

Replace radial shaft sealing ring (2).

Mit VAG 160
Drift set

*205589011500

Mit VAG 175
Drift

*221589041500

7

Lubricate sealing lip of radial shaft sealing ring (2) with transmission oil.

Universal hypoid gear oils (specification 235.7)

BB00.40-P-0235-07A

8

Tighten drain screw.

Model 257 with engine 256 with transmission 725.0
with code M005 (Vehicles with 4MATIC/all-wheel drive)With VAG 175

Replace drain screw.

Front axle transmission drain screw

*BA33.30-P-1008-03G

9.1

Fill front axle transmission (1) with hypoid gear oil through the front axle shaft opening.

Model 257 with engine 256 with transmission 725.0
with code M005 (Vehicles with 4MATIC/all-wheel drive)With VAG 175

Hypoid gear oil

*BF33.30-P-1001-03F

Hand pump

*210589007100

9.2

Fill front axle differential (1) via opening of filling screw with hypoid gear oil.

Model 257 with engine 256 with transmission 725.0
with code M005 (Vehicles with 4MATIC/all-wheel drive)With VAG 160

AR33.25-P-0300-01LWX

Replace filling screw.

Replace drain screw.

Quick-acting adhesive Omnifit 100H (50 g)

*BR00.45-Z-1110-02A

Loctite 7063 (400 ml) cleaning spray

*BR00.45-Z-1046-04A

Front axle transmission drain screw

*BA33.30-P-1008-03G

Front axle transmission filling screw

*BA33.30-P-1014-03G

Hypoid gear oil

*BF33.30-P-1001-03F

Hand pump

*210589007100

10

Install right front axle shaft.

AR33.30-P-0620MSA

11

Check front axle differential (1) for leak tightness and proper operation.

12

Install center and rear lower engine compartment lining.

AR61.20-P-1105FR

Front axle gear

Number

Designation

Model 257

BA33.30-P-1008-03G

Front axle transmission drain screw

Nm

20

Front axle gear

Number

Designation

Model 257

BA33.30-P-1014-03G

Front axle transmission filling screw

M24

Nm

25

Front axle gear

Number

Designation

Model 257

BF33.30-P-1001-03F

Hypoid gear oil

Filling capacity

Liter

0,55

Universal hypoid gear oil

BB00.40-P-0235-07A

Overview of axle gear oils

BB00.40-P-0231-01A

Axle gear oils

BB00.40-P-0239-72A

Install new radial sealing ring on outside right of front axle gear
Install new radial sealing ring on outside right of front axle gear
Install new radial sealing ring on outside right of front axle gear
Install new radial sealing ring on outside right of front axle gear

203 589 03 33 00

Internal extractor

210 589 00 71 00

Hand pump

205 589 01 15 00

Drift set

221 589 04 15 00

Drift

Install new radial sealing ring on outside right of front axle gear
Install new radial sealing ring on outside right of front axle gear

602 589 00 33 00

Impact extractor

221 589 04 33 00

Extraction tool

Repair materials

Number

Designation

Order number

BR00.45-Z-1046-04A

Loctite 7063 (400 ml) cleaning spray

A 001 986 71 71 09

BR00.45-Z-1110-02A

Quick-acting adhesive Omnifit 100H (50 g)

A 002 989 23 71

Powiązane dokumenty