Remove/install lower wishbone

AR33.20-P-0510H

Remove/install lower wishbone

10.10.06

14.9.06

Self-locking nut, supporting joint to steering knuckle

*BA33.20-P-1002-01H

Self-locking nut, supporting joint to lower transverse control arm

*BA33.20-P-1003-01H

 

Remove/install

 Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A



Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A



Notes on AIRmatic

AH32.22-P-1000-02H

 Installation

Only tighten nuts and bolts of chassis components when vehicle is in a ready-to-drive condition.

1

Hoist vehicle with lifting platform until wheels are free

2

Depressurize front suspension strut (40) using STAR DIAGNOSIS

3

Remove front wheel



Remove/install wheels, rotate if necessary

AP40.10-P-4050Z

4

Remove bottom engine compartment paneling

AR61.20-P-1105H

5

Detach front suspension strut (40) from lower transverse control arm (17)



*BA32.25-P-1002-04G

6

Support upper transverse control arm

AR33.20-P-0500-04H

7

Press supporting joint (7) out of steering knuckle (5)

AR33.20-P-0440-01H



*BA33.20-P-1002-01H

 Front axle supporting joint puller

*240589023300

 Press

*163589034300

8

Detach and remove lower transverse control arm (17) from front axle carrier (1)

 Installation: The eccentrics of the bolts (17b) and washers (17c) must engage in the support reinforcements (1h) on the front axle carrier (1).



9.1

Pry supporting joint (7) out of lower transverse control arm (17)

When replacing lower transverse control arm (17).

AR33.20-P-0440-02H



*BA33.20-P-1003-01H

 Puller

*220589003300

 Press

*163589034300

10

Install in the reverse order

11

Perform a wheel alignment check

AR40.20-P-0200H

Number

Designation

Model 240

BA32.25-P-1002-04G

Nut, front suspension strut to lower transverse control arm

Nm

20

Number

Designation

Model
240

BA33.20-P-1002-01H

Self-locking nut, supporting joint to steering knuckle

Stage 1

Nm

80

Stage 2

°

90

BA33.20-P-1003-01H

Self-locking nut, supporting joint to lower transverse control arm

Stage 1

Nm

60

Stage 2

°

120