ar3235s0311e

Remove/install stabilizer mount of stabilizer on rear axle

Typ ar · temat 32.35 · wersja 0103 · 2016-01-29

Dotyczy: Model 447 with engine 274, 651 Model 448 with engine 274

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.35 Stabilizator — Seria 447 · Seria 448 · Seria 651

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.51 Oś tylna › 17.51.40 Wahacz poprzeczny/wahacz/stabilizator — Seria 447 · Seria 448 · Seria 651

Dotyczy też silników/skrzyń biegów: 274 ***

AR32.35-S-0311E

Remove/install stabilizer mount of stabilizer on rear axle

27.01.2016

Model

447 with engine 274, 651

Model

448 with engine 274

Remove/install stabilizer mount of stabilizer on rear axle

Illustration shows MODEL 447.8 with ENGINE 651

1

Stabilizer

2

Screw

3

Bearing cap

4

Bearing cap

5

Stabilizer bar mounting

S32.35-4517-06

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Detach stabilizer bar (1) from rear axle

AR32.35-S-2210E

The stabilizer bar (1) is not removed completely. The bearing cap (4) must be accessible.

2

Remove bolts (2)

Bolt, stabilizer bar to underfloor

*BA32.35-N-1001-03A

3

Remove bearing caps (3, 4)

4

Remove stabilizer bar bushing (5)

Check anti-roll bar mounting (5), replace as per findings.

Installation: Apply suitable lubricant to the stabilizer bar bushings (5).

5

Install in the reverse order

Rear axle stabilizer bar

Number

Designation

Model 447, 448

BA32.35-N-1001-03A

Bolt, stabilizer bar to underfloor

Nm

18

Powiązane dokumenty