Remove/install front stabilizer bar

AR32.35-D-2050F

Remove/install front stabilizer bar

18.02.2013

MODEL

909

1

Nut

2

Rubber mount

3

Link rod

4

Screw

5

Bearing shell

6

Rubber mount

7

Stabilizer

 Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A



Notes on repair work on suspension components

AH00.00-P-0100-01A



Remove

1

Lift vehicle on vehicle lift

AR00.60-D-1000F

2

Remove stabilizer bar (7) on front axle beam

AR32.35-D-2050-03F

3

Press link rods (3) off the supports on the spring end stop plates in the direction of the arrow

4

Pull off rubber mounts (2) remaining on the spring end stop plates

5

Remove link rods (3) from stabilizer bar (7)

 Check rubber mount (2) and replace if necessary.



Install

6

Attach link rods (3) on stabilizer bar (7)

 Coat rubber mount (2) with lubricant.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

7

Install stabilizer bar (7) at front axle

AR32.35-D-2050-02F

 Only position bolts (4) and nuts (1); do not tighten.

8

Tighten nuts (1)

 Bolt or nut, anti-roll bar bearing shell to front axle beam

*BA32.35-N-1001-02E

 Front axle stabilizer bar

Number

Designation

Model 690, 901, 902, 903, 904, 909

BA32.35-N-1001-02E

Bolt or nut, anti-roll bar bearing shell to front axle beam

M8

Nm

30

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67