AR32.22-S-3000A | Removing and installing the electropneumatic valves | 29.3.96 |
MODEL 638.0 /1 with CODE (CL0) Rear air suspension lowerable/liftable
MODEL 638.2 with CODE (CL0) Rear air suspension lowerable/liftable
S32.22-0507-06
1 Service key
2 Compressor unit
3 Electropneumatic valves
4 Pressure pipe
5 Electropneumatic valve screws
6 Compressor unit screws
| Removing and installing | ||
1 | Place the vehicle in service mode | Press the service key (1) for approx. 2 seconds before raising the vehicle | |
2 | Raise and secure the vehicle | ||
3 | Remove and install the compressor | ||
4 | Disconnect the pressure pipe (4) from the drier in the electropneumatic valves (3) | To do this press in the sliding parts and withdraw the pressure pipes Installation: In order to guarantee the leaktightness of the pressure pipes at the connection points shorten the pipes approx. 0.5 cm | |
| |||
5 | Unscrew the electropneumatic valves (3) from the compressor unit (2) | ||
6 | The installation is carried out in reverse order. |
000 589 12 28 00
Knife