ar3222s3000a

Removing and installing the electropneumatic valves

Type ar · topic 32.22 · version 0101 · 1999-05-26

Applies to: MODEL 638.0 /1 with CODE (CL0) Rear air suspension lowerable/liftable MODEL 638.2 with CODE (CL0) Rear air suspension lowerable/liftable

Where it sits

Function group 2 Chassis › 32 Suspension › 32.22 Air suspension — Series 638 (models 0**, 1**, 2**)

EinPAS 20 Chassis › 20.16 Suspension › 20.16.13 Line/hose/valve — Series 638 (models 0**, 1**, 2**)

AR32.22-S-3000A

Removing and installing the electropneumatic valves

29.3.96

MODEL 638.0 /1 with CODE (CL0) Rear air suspension lowerable/liftable

MODEL 638.2 with CODE (CL0) Rear air suspension lowerable/liftable

Removing and installing the electropneumatic valves

S32.22-0507-06

1 Service key

2 Compressor unit

3 Electropneumatic valves

4 Pressure pipe

5 Electropneumatic valve screws

6 Compressor unit screws

Removing and installing

1

Place the vehicle in service mode

Press the service key (1) for approx. 2 seconds before raising the vehicle

2

Raise and secure the vehicle

3

Remove and install the compressor

AR32.22-S-2001A

4

Disconnect the pressure pipe (4) from the drier in the electropneumatic valves (3)

To do this press in the sliding parts and withdraw the pressure pipes

Installation: In order to guarantee the leaktightness of the pressure pipes at the connection points shorten the pipes approx. 0.5 cm

*000589122800

5

Unscrew the electropneumatic valves (3) from the compressor unit (2)

6

The installation is carried out in reverse order.

Removing and installing the electropneumatic valves

000 589 12 28 00

Knife

Referenced documents