Remove/install stabilizer bar on front axle

AR32.20-P-0300V

Remove/install stabilizer bar on front axle

23.4.12

 

Remove/install



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 These parts must be replaced if there are any visible signs of damage (crack formation or deformation) to chassis parts.

1

Lower front axle

AR33.10-P-0101V

2

Remove the front wheels

AP40.10-P-4050V

3

Detach torsion bar link rods (78) from torsion bar (77)



*BA32.20-P-1002-02B

4

Detach linkage from left front level sensor to body

MODEL 171 with CODE (614) Bi-xenon headlamp units



*BA82.10-P-1002-01A

5

Release left front level sensor from torsion bar (77)

Model 172 with automatic headlamp range adjustment



*BA82.10-P-1008-01A

6

Release right front level sensor from torsion bar (77)

Model 172 with code (483) ADVANCED AGILITY package



*BA82.10-P-1008-01A

7

Remove bolts (5) and remove torsion bar (77)

 Model 171: Remove torsion bar (77) to side.

Model 172: Remove torsion bar (77) to rear.



*BA32.20-P-1007-02B

8

Install in the reverse order

 Installation: Tighten nuts and bolts of chassis components only when vehicle is in the ready-to-drive condition.

9

Perform wheel alignment check

Model 171

AR40.20-P-0200V

Model 172

AR40.20-P-0200EW

10

Connect Star Diagnosis and adjust zero position of left front level sensor and right front level sensor

AD00.00-P-2000-04A

Number

Designation

Model
171

Model
172

BA32.20-P-1002-02B

Self-locking nut, connecting rod to torsion bar

M10

Nm

-

-

M101.5

Nm

-

-

M121.5

Nm

100

100

M141.5

Nm

-

-

BA32.20-P-1007-02B

Bolt, retaining bracket to longitudinal member

Nm

23

23

Number

Designation

Model
171 with code 614

Model
172

BA82.10-P-1002-01A

Nut, connecting rod to level sensor

Nm

5

8

BA82.10-P-1008-01A

Bracket with ball stud for link rod at torsion bar

Nm

-

20