ar3220p0200a

Removing and installing front spring

Typ ar · temat 32.20 · wersja 0105 · 1998-04-08

Dotyczy: MODEL 129

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.20 Zawieszenie stalowe, drążek skrętny, Niveaumat — Seria 129

EinPAS 20 Zawieszenie › 20.16 Zawieszenie › 20.16.30 Resor/resor pneumatyczny/amortyzator/kolumna zawieszenia — Seria 129

AR32.20-P-0200A

Removing and installing front spring

27.5.94

MODEL 129

Removing and installing front spring

P32.20-0203-06

Removal, installation

General information on springs.

Models 129, 140, 168, 170, 202, 210

AH32.20-P-9404-01A

1

Insert clamping plates (01b, 01c) and clamping device (01a).

*202589136300

*202589013100

Danger!

Risk of injury from being trapped or crushed when working on preloaded springs or spring bodies

Only use approved clamping devices and if appropriate also screen off the danger area.

Check special tools for damage and function, (visual inspection).

Wear safety gloves.

AS00.00-Z-0001-01A

2

Clamp, release front spring.

AR32.20-P-0200-01A

3

Remove front spring (12) with rubber mount (13) to the front.

Clean wishbone (31) in area of the supporting surface.

Insert zinc shim for England and Scandinavia.

After replacing the front spring or the rubber mount

Check, correct headlamp adjustment.

AP82.10-P-8260A

4

Install in reverse sequence.

Removing and installing front spring
Removing and installing front spring

202 589 01 31 00

202 589 13 63 00

Clamping plates

Clamping device

Powiązane dokumenty