P32.20-0203-06
| Removal, installation | ||
| General information on springs. | Models 129, 140, 168, 170, 202, 210 | |
1 | Insert clamping plates (01b, 01c) and clamping device (01a). | | |
| |||
Danger! | Risk of injury from being trapped or crushed when working on preloaded springs or spring bodies | Only use approved clamping devices and if appropriate also screen off the danger area. Check special tools for damage and function, (visual inspection). Wear safety gloves. | |
2 | Clamp, release front spring. | ||
3 | Remove front spring (12) with rubber mount (13) to the front. | Clean wishbone (31) in area of the supporting surface. Insert zinc shim for England and Scandinavia. After replacing the front spring or the rubber mount | |
Check, correct headlamp adjustment. | |||
4 | Install in reverse sequence. |
202 589 01 31 00
202 589 13 63 00
Clamping plates
Clamping device
Referenced documents
- ah3220p940401a Springs; general background information.
- ap8210p8260a Check and correct the adjustment of the headlamps
- ar3220p020001a Clamping and unclamping front and rear springs
- as0000z000101a Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension