ar2760p0002sr

Remove/install cable of selector lever lock

Typ ar · temat 27.60 · wersja 0201 · 2017-03-18

Dotyczy: Model 453 (except 453.09/39/49) with transmission 700.41

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 27 Automatyczna skrzynia biegów › 27.60 Układ zmiany biegów, sterowanie — Seria 453 (modele 04*, 05*, 06*, 34*, 35*, 36*, 44*, 45*, 46*)

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.35 Zmiana biegów/ sterowanie przełożeniami › 17.35.30 Moduł/dźwignia/drążek/cięgno zmiany biegów — Seria 453 (modele 04*, 05*, 06*, 34*, 35*, 36*, 44*, 45*, 46*)

Dotyczy też silników/skrzyń biegów: 700 41*

AR27.60-P-0002SR

Remove/install cable of selector lever lock

17.03.2017

Model

453 (except 453.09/39/49) with transmission 700.41

Modification notes

07.07.2016

"Operation step 12" added

Remove/install cable of selector lever lock

P27.60-3862-08

1

Cable

3

Lever

2

Ball socket

4

Bracket

Remove/install cable of selector lever lock

P27.60-3861-08

Shown on model 453.0

1

Cable

8

Floor covering

5

Bolts

9

Foam material

6

Seal

10

Electrical line

7

Guide tube

Remove/install

1

Remove selector lever with bearing bracket

AR27.60-P-6628SR

2

Remove fan

AR20.40-P-5614SR

3

Remove ball socket (2) from lever (3) using suitable tool

4

Unclip cable (1) upwards from bracket (4)

5

Remove floor covering in rear passenger compartment

Model 453.0 with transmission 700.41

AR68.20-P-4800SR

6

Lift floor covering (8)

Model 453.0 with transmission 700.41

7

Remove foam material (9)

Model 453.0 with transmission 700.41

Installation: Ensure that electrical lines (10) are routed correctly.

8

Move both front seats as far forward as possible and fold backrests down

Model 453.3/4 with transmission 700.41

9

Partially remove floor covering behind front seats, fold upward and fix in place

Model 453.3/4 with transmission 700.41

10

Unscrew bolts (5)

11

Detach sealing (6) from body

Installation:
Ensure that sealing (6) is seated correctly.
Otherwise, water can penetrate into the vehicle interior.

12

Loosen nuts at parking brake lever on body and raise parking brake lever far enough until cable (1) can be mounted and removed

Installation: Ensure that cable (1) is seated correctly.

Installation: Check free travel of parking brake.
After the parking brake lever has been moved to the 2nd detent the rear complete wheels must not be able to be turned by hand. The complete wheels must turn freely when the parking brake lever is released. If this is not the case:

Adjust parking brake.


AR42.20-P-0540SR

13

Remove cable (1) with sealing (6) out of the vehicle

Installation: Ensure that guide tube (7) is seated correctly.

14

Install in the reverse order

Powiązane dokumenty