ar2740d0505tsf

Remove/install suction and pressure lines in transmission housing

Typ ar · temat 27.40 · wersja 0101 · 2019-07-15

Dotyczy: Transmission 700.750 in model 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 27 Automatyczna skrzynia biegów › 27.40 Obudowa — Seria 910

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.13 Przewód sztywny/elastyczny/zawór — Seria 910

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.31 Pompa olejowa/kanał olejowy/filtr oleju/chłodzenie oleju — Seria 910

Dotyczy też silników/skrzyń biegów: 700 750

AR27.40-D-0505TSF

Remove/install suction and pressure lines in transmission housing

14.07.2019

Transmission

700.750 in model 910

Remove/install suction and pressure lines in transmission housing

1

Suction and pressure lines

2

Automatic transmission housing

3

Electrohydraulic controller unit

D27.40-A001-06

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on automatic transmission

AH27.19-P-0001-01NKB

Remove/install

1

Remove electrohydraulic controller unit (3).

AR27.19-D-0211TSF

2

Remove suction and pressure lines (1) from automatic transmission housing (2) or electrohydraulic controller unit (3).

To do so, pull out suction and pressure lines (1) using lint-free and dust-free cloth by hand.

Installation: Check suction and pressure lines (1) for condition and damage.

If damage is found,

replace suction and pressure lines (1).

3

Install in the reverse order.

Powiązane dokumenty