ar2700d020001ts

Drain transmission oil from torque converter and transmission

Typ ar · temat 27.00 · wersja 0101 · 2019-02-14

Dotyczy: Model 907 with transmission 722.9

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 27 Automatyczna skrzynia biegów › 27.00 Informacje ogólne — Seria 907

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.15 Sprzęgło › 17.15.31 Sprzęgło hydrauliczne — Seria 907

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.80 Przekładnia kompletna — Seria 907

Dotyczy też silników/skrzyń biegów: 722 9**

AR27.00-D-0200-01TS

Drain transmission oil from torque converter and transmission

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Model

907 with transmission 722.9

Torque converter

Number

Designation

Transmission 722.9

BA27.20-N-1001-01F

Drain screw to torque converter

M8

Nm

10

M10

Nm

15

Drain transmission oil from torque converter and transmission
Drain transmission oil from torque converter and transmission
Drain transmission oil from torque converter and transmission
Drain transmission oil from torque converter and transmission

001 589 65 09 00

Socket wrench bit

722 589 03 15 00

Drift

651 589 08 40 00

Counterholder

651 589 00 40 00

Counterholder

Drain transmission oil from torque converter and transmission

D27.00-1111-09

1

Crank engine at crankshaft until drain screw (4) on torque converter (5) can be accessed through opening on transmission (3).

Model 907 with engine 642 with transmission 722.9
Use socket wrench socket 001 589 65 09 00 to crank the engine.

Model 907 with engine 651 with transmission 722.9
with code H08 (Roof-mounted air conditioning system, reinforced)
Use counterholder 651 589 00 40 00 to crank the engine.

Model 907 with engine 651 with transmission 722.9
except code H08 (Roof-mounted air conditioning system, reinforced)
Use counterholder 651 589 08 40 00 to crank the engine.

2

Remove drain screw (4) and drain transmission oil from torque converter (5).

Commercially available devices/tools
Collection bowl

3

Tighten drain screw (4)   .

Replace seal.

4

Remove drain screw (2) and drain transmission oil from oil pan (1).

Commercially available devices/tools
Collection bowl

5

Release overflow pipe (7) with drift (6) in oil pan (1) and drain transmission oil from oil pan (1).

After releasing the overflow pipe (7), the oil pan (1) must always be removed and the overflow pipe (7) mounted back onto the oil pan (1) again.
Otherwise the transmission may be damaged.

Transmission oil escapes immediately after releasing the overflow pipe (7).

Commercially available devices/tools
Collection bowl

6

Check transmission oil.

If transmission oil is burnt or if it contains wear debris,

rinse the torque converter (5), oil lines and oil cooler of the automatic transmission.

Powiązane dokumenty